FAQ
Is the firmware free?
Yes. The USB Interface firmware is free for every DMX Core Pico 2 owner, including Re-Mapper owners. Download it from GitHub releases or install it with the DMX Core USB Interface Utility, which is free too.
Which lighting software works with it?
Lightkey on macOS, Lightjams and FreeStyler on Windows, and OLA on Linux have been tested. QLC+ does not list the interface yet; we’re working on getting support added to QLC+. See Lighting Software.
Does it need a driver?
No. It uses the standard USB serial driver built into Windows, macOS and Linux.
Can I watch the DMX while my lighting software is running?
Yes. The USB Interface Utility shows port status and live DMX levels while your software has the interface open, because it uses its own USB connection rather than the serial port.
Can I use RDM while my lighting software is running?
Yes. The DMX Core USB Interface Utility’s RDM tool works while your software has the interface open: find fixtures, change their DMX address, label or personality, and read their sensors without stopping the show. DMX output keeps going between RDM requests. Discovery mutes the fixtures for a moment.
Can I use both DMX ports of a DMX Core Pico 2?
Yes. Software that supports two-port extensions drives both ports over one serial port. For software that uses one port per interface, such as Lightkey, turn on a serial port per DMX port, and the Pico 2 shows up as two interfaces.
Can it receive DMX?
Yes. On the DMX Core Pico 2, on port A, and on port B when each port has its own serial port.
Does it support RDM?
Yes, on every port. Port A works with RDM-capable lighting software such as OLA, and both ports work with the RDM tool in the USB Interface Utility.
Does it support Art-Net or sACN?
No. The interface sends and receives DMX on its two ports. Your lighting software can convert to and from Art-Net or sACN if it supports that.
How do I power it?
From the computer’s USB port. Leave the power input disconnected while the board is connected to a computer; see Errata.
Can I go back to the Re-Mapper or my own firmware?
Yes. Copy the other .uf2 file onto the board the same way. A Re-Mapper’s mapping and license are kept, and the license is tied to the board, so it can always be activated again. See Installing the Firmware.
Is the firmware open source?
No. The firmware is available as a .uf2 download, but the source code is not published. The open-source libraries it uses are listed in THIRD-PARTY-NOTICES.txt with each release.
I have a suggestion for a new feature. Can you add it?
We’re open to suggestions. Open an issue on GitHub or contact us.
© 2026 DMX Pro Sales, LLC. All rights reserved. DMX Core is a registered trademark of DMX Pro Sales, LLC. Other product names are trademarks of their respective owners.