DMX Core Pico 2
  • Main
  • FAQ
  • Pin out
  • Software
  • Errata
Powered by GitBook
On this page
  • Hardware v1.0
  • Hardware rev v1.1

Errata

Hardware v1.0

  • USB-C power delivery missing. Requires power via power connector (7-28VDC) or with a USB-A to USB-C cable (included)

  • Optional pads for UART (TX/RX) are connected to the wrong GPIO pins. Can be used, but will then disable DMX Port A.

Hardware rev v1.1

  • Expansion port mapped to GPIO 21 and 22, which are unused, but are not tied to a hardware UART.

PreviousSoftware

Last updated 1 year ago