Main
Information about the DMX Core Pico 2
Last updated
Information about the DMX Core Pico 2
Last updated
Raspberry Pi Pico based controller with two fully isolated DMX512 ports. Write your own firmware and drop it onto the controller when connected to your computer (mounts as a USB flash drive and takes UF2 files. Both DMX512 ports are isolated and can be configured to be either input or output. Four digital inputs and four outputs are also on the board that allows you full control in your code. For example you could connect a button to send out DMX data when pushed. Or control the digital outputs from DMX.
You can buy the DMX Core Pico 2 directly from our web site at . We also have these listed on our and stores.
2x DMX512 ports, can be independently configured as input or output
Phoenix-style connectors for DMX, same as for the DMXking products
4x input pins, 3-24VDC input
4x output pins, sinking up to 30VDC
Takes standard RPi Pico programming, examples provided
Includes USB cable, power and Phoenix-style DMX plugs
Typical power consumption 30mA at 12V, less than 1w
Wall/surface
DIN rail
USB-C (USB-A to C cable included)
7-28V DC via power input terminal
Run your own code (developed in Pico C/C++, MicroPython or CircuitPython)
Purchase our software for DMX Channel re-mapping